Bumper Bro keel guard for the Hobie Lynx fishing kayak

Hobie Lynx on the shore with the Bumper Bro fitted to the bow

Stern Bumper Bro fitted to the stern of a Hobie Lynx kayak

Orange Hobie Lynx shown on white with both bow and stern Bumper Bro guards fitted

Bumper Bro keel guard for the Hobie Compass fishing kayak

Bumper Bro fitted to the bow of Hobie Compass kayak

Bumper Bro keel guard for the Hobie Compass Duo tandem kayak

Bumper Bro keel guard fitted to the bow of a lime green Hobie Compass Duo tandem fishing kayak

Bumper Bro kayak keel guard for the 2019+ Hobie Outback

Bumper Bro fitted to the bow of a dune coloured Hobie Outback kayak hull

Bumper Bro keel guard for the original Hobie Outback kayak

Bumper Bro fitted to the bow of a bright blue pre-2018 Hobie Outback

Stern Bumper Bro fitted to a dune colored pre-2018 Hobie Outback stern

Bumper Bro keel guard for the Hobie Passport 10 kayak

Bumper Bro fitted to the bow of a Hobie Passport 10 fishing kayak

Bumper Bro keel guard for the Hobie Passport 12 kayak

Bumper Bro fitted to the bow of an olive Hobie Passport 12 fishing kayak

Bumper Bro running down the keel of a white Hobie Passport 12 bow, viewed head-on

Bumper Bro keel guard for the Hobie Pro Angler 14 fishing kayak

Bumper Bro fitted to the bow of a Hobie Pro Angler 14 MD360

Bumper Bro keel guard for the Hobie Pro Angler 12 fishing kayak

Bumper Bro fitted to the bow of a camo Hobie Pro Angler 12 360

Bumper Bro fitted to the bow of a bright blue Hobie Revolution 13 kayak

Stern Bumper Bro fitted to a carribean blue Hobie Revolution 13

60 day money back guarantee

Free shipping on AU orders over $149

Bumper Bro Kayak Keel Guards - Hobie

BerleyPro Bumper Bro Keel Guards are custom-fit kayak keel protectors designed specifically for Hobie kayaks. Each guard is precision-shaped for the hull of the compatible Hobie model, providing a durable protective shield for the bow and, where applicable, stern of your kayak.

Bumper Bro Keel Guards are available for popular Hobie models including the Pro Angler 12 and 14, Passport 10.5 and 12, Outback, Compass, Lynx and Revolution 13.

Designed to protect high-wear areas of the hull from contact with sand, rocks, ramps, beaches and other abrasive surfaces, Bumper Bro helps protect your Hobie kayak while making it easier to drag, launch and land your kayak with confidence.

Specifications

Made in Australia

Material: Thermoformed 3mm ABS Plastic (high-impact, abrasion-resistant)
Weight: 50–200 g (model dependent – very lightweight)
Design: Custom-molded for specific kayak hulls (bow and/or stern)
Installation: Adhesive only – no drilling required (Marine Goop or 3M VHB tape recommended)
Adhesive: Not included – customer choice for best bond with kayak material
Protection: Shields the keel from rocks, oyster beds, boat ramps, and abrasive surfaces
Durability: Sacrificial part – designed to wear over time to protect your kayak hull

Compatible Hobie Kayak Models:

Lynx
Compass
Compass Duo
Outback 2019+
Outback 2018-
Passport 10.5
Passport 12
Pro Angler 12
Pro Angler 14
Revolution 13

Tools Needed for Easy Installation:

Adhesive Tape
Adhesive or marine goop
Isopropyl alcohol
Clean cloth
Heat gun (optional)

Shipping Info

60 Day Returns (view our returns & refunds policy)
Free AusPost Standard Shipping for domestic orders over $149 (bulky items excluded)
Same-day dispatch on orders received during business days before midday AEST
Tracked shipping on every order
Australia-wide delivery: Metro: 2-3 business days, Regional / Remote: 4-8 business days
International shipping worldwide: 7-12 business days (customs delays possible)
More shipping information

Bumper Bro: Custom-Fit Keel Protection for Your Hobie Kayak

Your Hobie kayak sees the most wear in the places that make contact with the ground. Launching from boat ramps, dragging across beaches, landing on rocky shores and navigating shallow water can expose the bow and keel to repeated scratches, scuffs and impacts. BerleyPro Bumper Bro Keel Guards provide a durable sacrificial layer between your Hobie hull and the surfaces that cause this wear.

Each Bumper Bro is custom-formed to suit the hull profile of the compatible Hobie kayak model. Made from durable thermoformed 3mm ABS plastic, the keel guard follows the contours of the hull to provide broad coverage over high-wear areas while adding minimal weight to your kayak.

Built to Protect Against Everyday Hull Wear

Bumper Bro is designed for the real-world abuse that kayak hulls encounter. Boat ramps, sand, gravel, rocks, oyster beds and rough shorelines can all contribute to scratches and abrasion, particularly when launching or landing your kayak.

The Bumper Bro acts as a replaceable protective layer, helping keep the original Hobie hull in better condition. Its lightweight construction adds very little weight while providing substantial coverage where it's needed most.

Custom-Fit for Your Hobie

Unlike a generic kayak keel guard, Bumper Bro is shaped specifically around the hull of each compatible Hobie model. This model-specific fit provides a clean appearance and allows the guard to sit closely against the kayak's contours.

Bumper Bro is available for a range of popular Hobie kayaks, including the Pro Angler 12 and 14, Passport 10.5 and 12, Outback, Compass, Lynx and Revolution 13. Select the correct model-specific version when ordering.

Durable 3mm ABS Construction

Bumper Bro is thermoformed from durable 3mm ABS plastic to provide a tough, lightweight protective barrier. The material is suited to the repeated abrasion and contact associated with launching, landing and transporting a kayak.

A broad bonding surface helps distribute the load across the hull and provides a secure attachment when installed correctly with a suitable adhesive.

Installation

Bumper Bro is designed for straightforward installation using a suitable marine adhesive such as Marine Goop. 3M VHB tape can also be used, although we recommend sealing the edges with adhesive to help prevent sand, grit and water from getting underneath the guard.

For model-specific fitting instructions, preparation advice and installation tips, see our Bumper Bro installation guides for more info

More information on BerleyPro Bumper Bros →

Frequently Asked Questions

What is the Bumper Bro keel guard used for?

The BerleyPro Bumper Bro Keel Guard is designed to protect the bow and keel of your kayak from scratches, scuffs, abrasion and impact caused by launching, landing and dragging your kayak over rough surfaces. It provides a durable, sacrificial layer between your kayak hull and surfaces such as boat ramps, sand, gravel, rocks, oyster beds and shallow shorelines. Prevention is better than cure!

Can a Bumper Bro also be used for Kayak Keel Repair?

Bumper Bro Kayak Keel Guards can also be used for kayak keel repair jobs, covering up a badly worn bow and stopping it from getting any worse. They're a great way to extend the life of your kayak and go a long way to preserving the resale value as well.

Does the Bumper Bro fit all kayak models?

No. Each Bumper Bro is molded to fit specific hull of the kayak models. Check compatibility before ordering.

Whats the difference between using a Bumper Bro and KeelEazy or Gorilla Tape?

Vinyl tape such as Gorilla Tape or KeelEazy tape is the less expensive option and it does help, however it won't last as long and only offers minimal impact absorbtion.

Bumper Bro Keel Guards cost a bit more but are made from highly durable ABS marine-safe plastic that absorbs hard impacts and provides longer-lasting protection. They do a superior job of protecting the hull.

How do you install a Bumper Bro on a kayak?

The Bumper Bro uses a plastic-safe marine adhesive for tool-free installation. No drilling is required. Instructions are included with the product. Review kayak specific documents in our installation guides vault. If you don't see your specific kayak model listed there read this install guide, which is universal.

What material is the Bumper Bro made from?

It is made from thermoformed ABS plastic. This material is abrasion resistant and reduces slipping during kayak launching or loading.

Does the Bumper Bro affect kayak performance?

No. It’s low-profile and lightweight, so it does not impact speed, tracking, stability or maneuverability on the water.

Can you install the Bumper Bro without drilling?

Yes. The Bumper Bro is installed using adhesive or double-sided tape only. It does not require screws or drilling into the kayak hull to get protected. Don't even think of trying to install a Bumper Bro with a drill. Creating holes in the hull underneath the waterline is always a bad idea.

Is the Bumper Bro a permanent part of the kayak?

No. The Bumper Bro is a sacrificial component designed to wear over time and protect the hull. Easy to to apply, so replaceable once it shows significant wear or damage.