Bumper Bro fitted to the bow of an orange camo Old Town Sportsman 106 Autopilot

Bumper Bro keel guard for the Old Town Sportsman 106 fishing kayak

Long Bumper Bro fitted along the bow of an orange camo Old Town Sportsman Autopilot 120

Old Town Sportsman Autopilot 120 bow viewed head-on with the Bumper Bro down the keel

Bumper Bro keel guard for the Old Town Sportsman Autopilot 136 fishing kayak

Bumper Bro keel guard for the Old Town Sportsman BigWater 132 PDL fishing kayak

Bumper Bro fitted to a turquoise camo Old Town Sportsman BigWater 132 PDL hull

Bumper Bro keel guard for the Old Town Sportsman PDL 120 fishing kayak

Bumper Bro fitted to the bow of a teal speckled Old Town Sportsman PDL 120 fishing kayak

Bumper Bro keel guard for the Old Town Sportsman Salty PDL 120, flat black scoop on white

Bumper Bro fitted to an orange and tan camo Old Town Sportsman Salty PDL 120 hull

60 day money back guarantee

Free shipping on AU orders over $149

Bumper Bro Kayak Keel Guards - Old Town

Shield the hull of your Old Town fishing kayak with the BerleyPro Bumper Bro Keel Guard, custom-molded to preserve your boat's structural integrity and gelcoat finish. Designed specifically for popular Old Town models - including the Sportsman Bigwater, Sportsman PDL 106/120, Salty PDL, Topwater, and Autopilot 120/136 series -this precision guard acts as a sacrificial shield for your bow.

Thermoformed in Australia from high-impact 3mm ABS plastic, the Bumper Bro provides heavy-duty protection against concrete boat ramps, oyster beds, and jagged rocks. Its exact-fit design provides a wide bonding surface for maximum adhesion without adding drag or affecting your kayak's tracking on the water.

Specifications

Made in Australia

Material: Thermoformed 3mm ABS Plastic (high-impact, abrasion-resistant)
Weight: 50–200 g (model dependent – very lightweight)
Design: Custom-molded for specific kayak hulls (bow and/or stern)
Installation: Adhesive only – no drilling required (Marine Goop or 3M VHB tape recommended)
Adhesive: Not included – customer choice for best bond with kayak material
Protection: Shields the keel from rocks, oyster beds, boat ramps, and abrasive surfaces
Durability: Sacrificial part – designed to wear over time to protect your kayak hull

Compatible Old Town Kayak Models:

Sportsman 106
Sportsman 106 Autopilot MK
Sportsman PDL 106
Sportsman Autopilot 120
Sportsman Autopilot 136
Sportsman Bigwater 136 PDL
Sportsman 120
Sportsman 120 PDL
Sportsman 120 Pro
Sportsman Salty PDL Pro

Tools Needed for Easy Installation:

Adhesive Tape
Adhesive or marine goop
Isopropyl alcohol
Clean cloth
Heat gun (optional)

Shipping Info

60 Day Returns (view our returns & refunds policy)
Free AusPost Standard Shipping for domestic orders over $149 (bulky items excluded)
Same-day dispatch on orders received during business days before midday AEST
Tracked shipping on every order
Australia-wide delivery: Metro: 2-3 business days, Regional / Remote: 4-8 business days
International shipping worldwide: 7-12 business days (customs delays possible)
More shipping information

Bow Protection for Your Old Town Kayak

Stop worrying about launch-day damage and let the BerleyPro Bumper Bro absorb the punishment instead of your hull. Custom-molded to match your boat's contours, this heavy-duty kayak keel protector shields the bow from deep gouges, scratches, and severe abrasion. Weighing just 100–200g (depending on your specific model), it delivers ultimate protection while keeping your kayak's tracking, speed, and maneuverability completely unchanged.

Why Old Town Anglers Need a Keel Guard

Old Town kayaks - from the agile Salty PDL to heavy motor-driven Autopilot 120/136 setups - are built for serious fishing and exploration. However, heavy hulls take massive abuse at concrete boat ramps, rocky shorelines, oyster beds, and shallow launches. The Bumper Bro provides a thick, sacrificial layer over the most vulnerable part of your bow, preserving your plastic hull and protecting your kayak's resale value.

Thermoformed ABS Durability

Crafted in Australia from high-impact, UV-stabilized 3mm thermoformed ABS plastic, the Bumper Bro creates an extremely tough barrier against rock strikes and gravel drags. Its wide, model-specific bonding flanges ensure a low-profile, drag-free fit that stays locked in place season after season.

Simple Installation & Mounting Options

Install with marine goop or any adhesive safe for your kayak’s material for a permanent bond. It can also be attached with 3M VHB tape, but we recommend sealing the edges with adhesive to prevent sand and debris from getting underneath. For complete step-by-step instructions, tips, and troubleshooting, view our Bumper Bro installation guides for more info

More information on BerleyPro Bumper Bros →

Frequently Asked Questions

What is the Bumper Bro keel guard used for?

The BerleyPro Bumper Bro Keel Guard is designed to protect the bow and keel of your kayak from scratches, scuffs, abrasion and impact caused by launching, landing and dragging your kayak over rough surfaces. It provides a durable, sacrificial layer between your kayak hull and surfaces such as boat ramps, sand, gravel, rocks, oyster beds and shallow shorelines. Prevention is better than cure!

Can a Bumper Bro also be used for Kayak Keel Repair?

Bumper Bro Kayak Keel Guards can also be used for kayak keel repair jobs, covering up a badly worn bow and stopping it from getting any worse. They're a great way to extend the life of your kayak and go a long way to preserving the resale value as well.

Does the Bumper Bro fit all kayak models?

No. Each Bumper Bro is molded to fit specific hull of the kayak models. Check compatibility before ordering.

Whats the difference between using a Bumper Bro and KeelEazy or Gorilla Tape?

Vinyl tape such as Gorilla Tape or KeelEazy tape is the less expensive option and it does help, however it won't last as long and only offers minimal impact absorbtion.

Bumper Bro Keel Guards cost a bit more but are made from highly durable ABS marine-safe plastic that absorbs hard impacts and provides longer-lasting protection. They do a superior job of protecting the hull.

How do you install a Bumper Bro on a kayak?

The Bumper Bro uses a plastic-safe marine adhesive for tool-free installation. No drilling is required. Instructions are included with the product. Review kayak specific documents in our installation guides vault. If you don't see your specific kayak model listed there read this install guide, which is universal.

What material is the Bumper Bro made from?

It is made from thermoformed ABS plastic. This material is abrasion resistant and reduces slipping during kayak launching or loading.

Does the Bumper Bro affect kayak performance?

No. It’s low-profile and lightweight, so it does not impact speed, tracking, stability or maneuverability on the water.

Can you install the Bumper Bro without drilling?

Yes. The Bumper Bro is installed using adhesive or double-sided tape only. It does not require screws or drilling into the kayak hull to get protected. Don't even think of trying to install a Bumper Bro with a drill. Creating holes in the hull underneath the waterline is always a bad idea.

Is the Bumper Bro a permanent part of the kayak?

No. The Bumper Bro is a sacrificial component designed to wear over time and protect the hull. Easy to to apply, so replaceable once it shows significant wear or damage.