Bumper Bro Kayak Keel Guards - Vibe

BerleyPro Bumper Bro Keel Guards are custom-fit kayak keel protectors designed specifically for Vibe Fishing Kayaks. Each Bumper Bro is precision-shaped to suit the hull of the compatible Vibe model, providing durable protection for the bow and keel against scratches, abrasion and impact during launching, landing and everyday use.

Bumper Bro Keel Guards are available for popular Vibe Kayak models including the Makana 100, Sea Ghost 110, Sea Ghost 130 and Shearwater 125. The lightweight, low-profile design provides a protective layer over high-wear areas of your kayak without adding unnecessary bulk.

Specifications

Made in Australia

Material: Thermoformed 3mm ABS Plastic (high-impact, abrasion-resistant)
Weight: 50–200 g (model dependent – very lightweight)
Design: Custom-molded for specific kayak hulls (bow and/or stern)
Installation: Adhesive only – no drilling required (Marine Goop or 3M VHB tape recommended)
Adhesive: Not included – customer choice for best bond with kayak material
Protection: Shields the keel from rocks, oyster beds, boat ramps, and abrasive surfaces
Durability: Sacrificial part – designed to wear over time to protect your kayak hull

Compatible Vibe Kayak Models:

Makana 100
SeaGhost 110
SeaGhost 130
Shearwater 125

Tools Needed for Easy Installation:

Adhesive Tape
Adhesive or marine goop
Isopropyl alcohol
Clean cloth
Heat gun (optional)

Shipping Info

60 Day Returns (view our returns & refunds policy)
Free AusPost Standard Shipping for domestic orders over $149 (bulky items excluded)
Same-day dispatch on orders received during business days before midday AEST
Tracked shipping on every order
Australia-wide delivery: Metro: 2-3 business days, Regional / Remote: 4-8 business days
International shipping worldwide: 7-12 business days (customs delays possible)
More shipping information

Custom-Fit Keel Protection for Vibe Fishing Kayaks

Launching and landing your Vibe Fishing Kayak can put repeated wear on the bow and keel. Boat ramps, beaches, rocks, oyster beds, sand and concrete can all cause scratches, scuffs and abrasion over time. BerleyPro Bumper Bro provides a durable sacrificial layer between your Vibe kayak hull and these high-wear surfaces.

Each Bumper Bro is precision-formed to suit the hull profile of the compatible Vibe kayak model, providing targeted protection where the bow takes the most wear. The lightweight construction adds only around 50–200 g depending on the model, while the low-profile design keeps the guard unobtrusive once fitted.

Designed for Vibe Fishing Kayaks

Vibe kayaks are built for fishing across a wide range of environments, from lakes and rivers to coastal water. That means the hull can regularly encounter boat ramps, rocky shorelines, sandy beaches, oyster beds and shallow launches.

Bumper Bro is custom-shaped for specific Vibe models rather than using a generic one-size-fits-all design. Available for models including the Makana 100, Sea Ghost 110, Sea Ghost 130 and Shearwater 125, each version is formed to provide a close-fitting layer of protection over the high-wear area of the hull.

Durable 3mm ABS Construction

Bumper Bro is thermoformed from durable 3mm ABS plastic to create a tough, lightweight barrier against everyday hull wear. The model-specific contour provides broad coverage, while the large bonding surface helps create a secure attachment when installed correctly.

The result is a low-profile kayak keel guard designed to protect the original hull from the repeated scratches and abrasion that come with launching, landing and moving your kayak.

Easy Installation

Bumper Bro is designed for straightforward installation using a suitable marine adhesive such as Marine Goop. 3M VHB tape can also be used, although we recommend sealing the edges with adhesive to help prevent sand, grit and water from getting underneath the guard.

For complete fitting instructions, surface preparation advice, installation tips and troubleshooting, see our Bumper Bro installation guides for more info

More information on BerleyPro Bumper Bros →

Frequently Asked Questions

What is the Bumper Bro keel guard used for?

The BerleyPro Bumper Bro Keel Guard is designed to protect the bow and keel of your kayak from scratches, scuffs, abrasion and impact caused by launching, landing and dragging your kayak over rough surfaces. It provides a durable, sacrificial layer between your kayak hull and surfaces such as boat ramps, sand, gravel, rocks, oyster beds and shallow shorelines. Prevention is better than cure!

Can a Bumper Bro also be used for Kayak Keel Repair?

Bumper Bro Kayak Keel Guards can also be used for kayak keel repair jobs, covering up a badly worn bow and stopping it from getting any worse. They're a great way to extend the life of your kayak and go a long way to preserving the resale value as well.

Does the Bumper Bro fit all kayak models?

No. Each Bumper Bro is molded to fit specific hull of the kayak models. Check compatibility before ordering.

Whats the difference between using a Bumper Bro and KeelEazy or Gorilla Tape?

Vinyl tape such as Gorilla Tape or KeelEazy tape is the less expensive option and it does help, however it won't last as long and only offers minimal impact absorbtion.

Bumper Bro Keel Guards cost a bit more but are made from highly durable ABS marine-safe plastic that absorbs hard impacts and provides longer-lasting protection. They do a superior job of protecting the hull.

How do you install a Bumper Bro on a kayak?

The Bumper Bro uses a plastic-safe marine adhesive for tool-free installation. No drilling is required. Instructions are included with the product. Review kayak specific documents in our installation guides vault. If you don't see your specific kayak model listed there read this install guide, which is universal.

What material is the Bumper Bro made from?

It is made from thermoformed ABS plastic. This material is abrasion resistant and reduces slipping during kayak launching or loading.

Does the Bumper Bro affect kayak performance?

No. It’s low-profile and lightweight, so it does not impact speed, tracking, stability or maneuverability on the water.

Can you install the Bumper Bro without drilling?

Yes. The Bumper Bro is installed using adhesive or double-sided tape only. It does not require screws or drilling into the kayak hull to get protected. Don't even think of trying to install a Bumper Bro with a drill. Creating holes in the hull underneath the waterline is always a bad idea.

Is the Bumper Bro a permanent part of the kayak?

No. The Bumper Bro is a sacrificial component designed to wear over time and protect the hull. Easy to to apply, so replaceable once it shows significant wear or damage.