Bumper Bro keel guard for Native Watercraft kayaks

Bumper Bro fitted to the bow of a Native Slayer Propel 10 fishing kayak

Stern Bumper Bro on a blue speckled Native Slayer 10 fishing kayak

Bumper Bro fitted to the bow of a Native Slayer 13 fishing kayak

Stern Bumper Bro on the stern of a Native Slayer 13 fishing kayak

Bumper Bro keel guard for the Native Slayer Propel Max fishing kayak

Bumper Bro fitted to the bow of a grey Native Slayer Propel Max 10, studio shot

Stern Bumper Bro for the Native Slayer Propel Max 10 fishing kayak

Stern Bumper Bro fitted to a Native Slayer Propel Max 10 fishing kayak

Bumper Bro keel guard for the 2022 Native Slayer Propel Max 12.5 fishing kayak

Bumper Bro fitted to the bow of a charcoal Native Slayer Propel Max 12.5 fishing kayak

Bumper Bro keel guard for the 2021 Native Slayer Propel Max 12.5 fishing kayak

Bumper Bro fitted along the keel edge of a bright orange Native Slayer Propel Max hull

Stern Bumper Bro for the Native Slayer Propel Max fishing kayak

Stern Bumper Bro fitted to a Native Slayer Propel Max fishing kayak stern

Bumper Bro fitted to the bow of an olive camo Native Titan 10.5 resting on concrete

Textured Bumper Bro fitted to an olive Native Titan 10.5 kayak hull

Stern Bumper Bro on a cream Native Titan 10.5 kayak stern

Bumper Bro fitted to the bow of an olive Native Titan Propel 13.5 standing on turf

Bumper Bro fitted to an olive camo Native Titan kayak hull

Bumper Bro keel guard for the Native Hammer fishing kayak

Bumper Bro keel guard for the Native Titan X fishing kayak

60 day money back guarantee

Free shipping on AU orders over $149

Bumper Bro Kayak Keel Guards - Native Watercraft

BerleyPro Bumper Bro Keel Guards are custom-molded kayak keel protectors designed specifically for Native Watercraft kayaks. Each Bumper Bro is shaped to suit the hull of the compatible Native model, providing durable protection for high-wear areas of the bow and keel.

Bumper Bro is available for popular Native Watercraft models including the Hammer 1210, Titan and Slayer series. Designed to protect your kayak from scratches, abrasion and impact when launching, landing and dragging across ramps, beaches, rocks and other rough surfaces, Bumper Bro provides a durable sacrificial layer between your Native kayak and the ground.

Specifications

Made in Australia

Material: Thermoformed 3mm ABS Plastic (high-impact, abrasion-resistant)
Weight: 50–200 g (model dependent – very lightweight)
Design: Custom-molded for specific kayak hulls (bow and/or stern)
Installation: Adhesive only – no drilling required (Marine Goop or 3M VHB tape recommended)
Adhesive: Not included – customer choice for best bond with kayak material
Protection: Shields the keel from rocks, oyster beds, boat ramps, and abrasive surfaces
Durability: Sacrificial part – designed to wear over time to protect your kayak hull

Compatible Native Watercraft Kayak Models:

Slayer Propel 10
Slayer Propel 10 LTE
Slayer Propel 13
Slayer Propel Max 10
Slayer Propel Max
Slayer Propel Max 12.5
Titan Propel 10.5
Titan Propel 12
Titan Propel 13.5
Titan X 10.5
Titan X 12.5
Hammer

Tools Needed for Easy Installation:

Adhesive Tape
Adhesive or marine goop
Isopropyl alcohol
Clean cloth
Heat gun (optional)

Shipping Info

60 Day Returns (view our returns & refunds policy)
Free AusPost Standard Shipping for domestic orders over $149 (bulky items excluded)
Same-day dispatch on orders received during business days before midday AEST
Tracked shipping on every order
Australia-wide delivery: Metro: 2-3 business days, Regional / Remote: 4-8 business days
International shipping worldwide: 7-12 business days (customs delays possible)
More shipping information

Custom-Fit Keel Protection for Native Watercraft Kayaks

Launching and landing your Native Watercraft kayak can put repeated wear on the bow and keel. Boat ramps, rocky banks, oyster beds, sand and other rough surfaces can cause scratches, scuffs and abrasion to the hull. BerleyPro Bumper Bro provides a durable sacrificial layer between your Native kayak and these high-wear surfaces.

Each Bumper Bro is custom-formed to suit the hull profile of the compatible Native Watercraft model, providing targeted coverage where protection is needed most. The lightweight design adds minimal weight to your kayak while helping protect the original hull from everyday wear.

Designed for Native Watercraft

Native Watercraft kayaks are built for serious fishing, and their hulls regularly encounter ramps, beaches, rocks, oyster beds and shallow launches. Bumper Bro is designed specifically around the contours of compatible Native models, providing a close-fitting, low-profile keel protector rather than a one-size-fits-all solution.

Bumper Bro is available for selected Native Watercraft models, including the Hammer 1210, Titan and Slayer series. Select the correct model-specific version when ordering to ensure the appropriate fit.

Durable 3mm ABS Construction

Bumper Bro is thermoformed from durable 3mm ABS plastic to create a tough, lightweight protective barrier over high-wear areas of the hull. The material is designed to withstand the repeated scraping and abrasion associated with launching, landing and moving your kayak across rough surfaces.

A large bonding surface helps distribute the load across the hull and provides a secure attachment when installed correctly with a suitable adhesive.

Easy Installation

Bumper Bro is designed for straightforward installation using a suitable marine adhesive such as Marine Goop. 3M VHB tape can also be used, although we recommend sealing the edges with adhesive to help prevent sand, grit and water from getting underneath the guard.

For model-specific fitting instructions, surface preparation, installation tips and troubleshooting, see our Bumper Bro installation guides for more info

More information on BerleyPro Bumper Bros →

Frequently Asked Questions

What is the Bumper Bro keel guard used for?

The BerleyPro Bumper Bro Keel Guard is designed to protect the bow and keel of your kayak from scratches, scuffs, abrasion and impact caused by launching, landing and dragging your kayak over rough surfaces. It provides a durable, sacrificial layer between your kayak hull and surfaces such as boat ramps, sand, gravel, rocks, oyster beds and shallow shorelines. Prevention is better than cure!

Can a Bumper Bro also be used for Kayak Keel Repair?

Bumper Bro Kayak Keel Guards can also be used for kayak keel repair jobs, covering up a badly worn bow and stopping it from getting any worse. They're a great way to extend the life of your kayak and go a long way to preserving the resale value as well.

Does the Bumper Bro fit all kayak models?

No. Each Bumper Bro is molded to fit specific hull of the kayak models. Check compatibility before ordering.

Whats the difference between using a Bumper Bro and KeelEazy or Gorilla Tape?

Vinyl tape such as Gorilla Tape or KeelEazy tape is the less expensive option and it does help, however it won't last as long and only offers minimal impact absorbtion.

Bumper Bro Keel Guards cost a bit more but are made from highly durable ABS marine-safe plastic that absorbs hard impacts and provides longer-lasting protection. They do a superior job of protecting the hull.

How do you install a Bumper Bro on a kayak?

The Bumper Bro uses a plastic-safe marine adhesive for tool-free installation. No drilling is required. Instructions are included with the product. Review kayak specific documents in our installation guides vault. If you don't see your specific kayak model listed there read this install guide, which is universal.

What material is the Bumper Bro made from?

It is made from thermoformed ABS plastic. This material is abrasion resistant and reduces slipping during kayak launching or loading.

Does the Bumper Bro affect kayak performance?

No. It’s low-profile and lightweight, so it does not impact speed, tracking, stability or maneuverability on the water.

Can you install the Bumper Bro without drilling?

Yes. The Bumper Bro is installed using adhesive or double-sided tape only. It does not require screws or drilling into the kayak hull to get protected. Don't even think of trying to install a Bumper Bro with a drill. Creating holes in the hull underneath the waterline is always a bad idea.

Is the Bumper Bro a permanent part of the kayak?

No. The Bumper Bro is a sacrificial component designed to wear over time and protect the hull. Easy to to apply, so replaceable once it shows significant wear or damage.