The easiest to install transducer spray deflector for stopping that annoying rooster tail from ruining your transducer reading and covering the back of your boat with water.
Your model and part number are usually on a label on the back of the unit, or in its System / About menu.
Tired of transducer rooster tail spray covering your boat and ruining sonar? The Rooster Rooter is a simple and effective spray deflector for Lowrance, SImrad and Garmin and transducers. We’ve designed this adaptor to mount in between the transducer and the bracket keeping the back of your boat looking tidy. Its simple to install and is designed to deflect water without interfering with sonar readings. This is the simplest transducer spray deflector on the market.
Made from 2mm stainless steel the Rooster Rooter can be installed in minutes to stop you from drowning the back of your boat with water. The way this works is simple; it blocks the water coming up behind the transducer and spraying everywhere. Installation is simple by just wedging it between the stainless steel or plastic bracket and the transducer.
Installation
Extremely easy. No tools or drilling required — it simply wedges into place in under 2 minutes.
Transducer Compatability
Garmin – BP2303
Fits the following transducers:
GT24UHD-TM
GT40-TM
GT41-TM
GT50M-TM
GT51M-TM
GT52HW-TM
GT54UHD-TM
GT56UHD-TM
Lowrance / Simrad – BP2301
Fits the following transducers that use either stainless steel or plastic mounts:
Totalscan
3D structure
3-in-1 Active Imaging transducer
*This does not fit the LSS-2 Transducer without drilling 6 more holes in the mount
Lowrance HD – BP2305
Fits the following transducer:
ActiveImaging HD 3-in-1 FishReveal Transducer
Rooster Rooter FAQ
What is the Rooster Rooter?
The Rooster Rooter is a stainless steel transducer spray deflector designed to stop annoying “rooster tail” spray from your transducer.
Which transducers is it compatible with?
It fits most Lowrance & Garmin transducers including TotalScan, Active Imaging, 3-in-1, StructureScan, and similar models.
How easy is it to install?
Extremely easy. No tools or drilling required - it simply wedges into place in under 2 minutes.
Will it affect my sonar performance?
No. The Rooster Rooter is designed to deflect water without interfering with sonar readings.
What material is it made from?
Marine-grade stainless steel for maximum durability and corrosion resistance
